Designer : Cuddly Stitches Craft
Instagram: cuddlystitchescraft
Hello everyone who loves amigurumiβ¦
Today I shared the amigurumi jellyfish crochet pattern for you. Below you will find a step-by-step tutorial of this pattern and you will complete it without any difficulty. Thanks to the creator for this cute pattern.
![Crochet Jellyfish Amigurumi Free Pattern – Amigurumi Crochet Jellyfish Amigurumi Free Pattern – Amigurumi](https://blog.amigurumiallfreepatterns.com/wp-content/uploads/2023/04/Amigurumi-jellyfish-Free-Pattern_blogAllfree_250423-2.jpg)
Amigurumi cats, amigurumi dolls, amigurumi dogs, amigurumi unicorns, amigurumi lambs, amigurumi dinosaurs, amigurumi foxes, amigurumi bears, amigurumi giraffes, amigurumi pigs, amigurumi birds, amigurumi bunny, amigurumi elephants, amigurumi hippos, amigurumi monkeysβ¦ All the amigurumi toy crochet patterns and ideas you are looking for are here. Have a great timeβ¦
Materials
1. Yarn:
-Fine Sport #2 = 4 ply / 55% cotton and 45% acrylic
-1x ball of dark blue yarn β YarnArt Jeans β colour 55 β (50g/160m)
-1x ball of light blue yarn β YarnArt Jeans β colour 76 β (50g/160m)
-1x ball of pink yarn β YarnArt Jeans β colour 42 β (50g/160m)
2. Crochet hook: 3mm = C/2
3. safety eyes size 12 mm,
4. scissors, yarn needle, pins with large heads,stitch marker or thin yarn to use instead
5. Polyester fibre fill
6. A long piece of thin white yarn for eye lash embroidery
Abbreviations
MR: Magic ring
ST: Stitch
SC: Single crochet stitch
HDC: Half double crochet stitch
DC: Double crochet stitch
TC: Triple crochet stitch
CH: Chain stitch
SL: Slip stitch
INC: Increase = two single crochet stitches in the same stitch
L INC: Large increase three single crochet stitches in the same stitch
DEC: Standard decrease
INV DEC: Invisible decrease
BLO: Back loops only
FO: Fasten off
(β¦.) x 6: repeat the pattern inside the brackets by the given number (in this example, repeat the pattern in the brackets 6 times
{β¦}: number shown inside these brackets equals the number of total stitches at the end of each round
*The finished size β height: 25.5cm / 10 inches and width: 9cm / 3.5 inches
![](https://crochet.alwaysfreeamigurumi.com/wp-content/uploads/2024/02/Amigurumi-jellyfish-Free-Pattern_blogAllfree_250423-3.jpg)
JESSICA THE JELLYFISH AMIGURUMI FREE PATTERN
Head
Starting from the centre of the head downwards.
R1: MR β 6 x SC into the ring {6}
R2: INC in each ST around {12}
R3: (SC in next ST, INC) x 6 {18}
R4: SC in next ST, INC, (SC in next 2 ST, INC) x 5, SC in next ST {24}
R5: (SC in next 3 ST, INC) x 6 {30}
R6: SC in next 2 ST, INC, (SC in next 4 ST, INC) x 5, SC in next 2 ST {36}
R7: (SC in next 5 ST, INC) x 6 {42}
R8: SC in next 3 ST, INC, (SC in next 6 ST, INC) x 5, SC in next 3 ST {48}
R9: (SC in next 7 ST, INC) x 6 {54}
R10: SC in next 4 ST, INC, (SC in next 8 ST, INC) x 5, SC in next 4 ST {60}
R11: (SC in next 9 ST, INC) x 6 {66}
R12-R22 (11 rounds): SC in each ST around {66} β leave your stitch marker in at the start of R17 as you will need to refer to it when placing the eyes
R23: (SC in next 9 ST, INV DEC) x 6 {60}
R24: SC in next 4 ST, INV DEC, (SC in next 8 ST, INV DEC) x 5, SC in next 4 ST {54}
R25: (SC in next 7 ST, INV DEC) x 6 {48}
R26: SC in next 3 ST, INV DEC, (SC in next 6 ST, INV DEC) x 5, SC in next 3 ST (42), do not FO and do not cut the yarn off
You can now place the eyes:
β stuff the head well first
β place eyes between rounds R17 and R18 leaving 11 stitches in between the eyes
β it helps to use pins with large heads to first mark the spots where the eyes will be placed β
you can make a decision whether you are happy with the placement and if it looks symmetrical before you insert the safety eyes; the safety eyes usually make a large hole in between the stitches so it is not recommended to change the placement of the eyes once they are in
β you can now insert the safety eyes and put the safety backs on
![](https://blog.amigurumiallfreepatterns.com/wp-content/uploads/2023/04/Amigurumi-jellyfish-Free-Pattern_blogAllfree_250423-4-1.jpg)
Belly
Starting from the centre of the belly.
R1: MR-6 x SC into the ring {6}
R2: INC in each ST around {12}
R3: (SC in next ST, INC) x 6 {18}
R4: SC in next ST, INC, (SC in next 2 ST, INC) x 5, SC in next ST {24}
R5: (SC in next 3 ST, INC) x 6 {30}
R6: SC in next 2 ST, INC, (SC in next 4 ST, INC) x 5, SC in next 2 ST {36}
R7: (SC in next 5 ST, INC) x 6 {42}
FO and weave the yarn end in
Tentacles
Make 4 (2x dark blue tentacles and 2x light blue tentacles)
R1: Chain 101 STs
R2: Start from the 2nd chain from the hook β (HDC in next ST, 2xHDC in next ST) x 50 {150}
Tie a knot with the two yarn ends and do not weave them in β you will use them to attach the tentacles to the belly
Make 6 (3x dark blue tentacles and 3x light blue tentacles)
R1: Chain 81 STs
R2: Start from the 2nd chain from the hook β 1xSC in each ST (80}
Tie a knot with the two yarn ends and do not weave them in β you will use them to attach the tentacles to the belly
![](https://blog.amigurumiallfreepatterns.com/wp-content/uploads/2023/04/Amigurumi-jellyfish-Free-Pattern_blogAllfree_250423.jpg)
Bow
R1: Chain 5 STS
R2: 4xTC into the 1st CH ST of R1
R3: Chain 4 STs and SL ST into the 1st CH ST of R1
R4: Chain 4 STS
R5: 4xTC into the 1st CH ST of R1
R6: Chain 4 STs and SL ST into the 1st CH ST of R1
FO and wrap the yarn tail around the centre of the bow several times. Tie a knot with both yarn tails on the back of the bow and weave the yarn ends in.
Sew the bow to the head.
Assembly
How to attach the tentacles to the belly:
Step 1: Use pins with large heads to mark the spots where you would like to attach the tentacles β distribute the first 4 tentacles evenly around R3 of the belly. The remaining 6 tentacles can be attached to the increase stitches in R6 of the belly.
Step 2: Attach each tentacle individually by pulling the yarn ends through the belly.
Step 3: Tie a knot with the yarn ends on the wrong side of the belly.
Step 4: Attach all of the tentacles using the same method
![](https://blog.amigurumiallfreepatterns.com/wp-content/uploads/2023/04/Amigurumi-jellyfish-Free-Pattern_blogAllfree_250423-1-1.jpg)
How to attach the belly to the head:
R1: You will need to crochet the two parts together
β leave your hook in the last ST of R26 of the head
β slip your hook through the next ST of the head
β and then slip your hook through any ST of the belly
β so you now have two STS on the hook, SC these 2 STs together
β SC the corresponding STS of each part together all the way round {42}
R2: Change yarn to light blue colour and crochet the decorative hem β (SC in next ST, DC in next ST, 2xTC in next ST, 2xTC in next ST, DC in next ST, SC in next ST) x 7 {56}, FO and weave yarn end in.
Eye lash embroidery:
You may choose to embroider the eye lashes using white thread yarn.
Congratulations, Your crochet toy Jessica the jellyfish is ready!
More amigurumi jellyfish ideas: